Rockwell Automation Publication 750-IN118A-EN-P - May 2021 11
Chapter 1
Product Overview
The PowerFlex® 755T Drives Configured to Order Program combines standard
PowerFlex 750-Series Drives with configured input bay and configured output
bay options.
The Configured To Order (CTO) Program is available for PowerFlex 755TM,
755TL, and 755TR drives in frames 8 and 9. The configured bays are floor-
mounted IP21, UL Type 1, or IP54, UL Type 12 enclosures. CTO drives are
configured and priced in the Advisor tool, allowing them to meet precise
application requirements. Example CTO options include:
• Input protection using circuit breaker or fuses
• Door-mounted push buttons, pilot lights, selector switches, speed
potentiometer, infrared (IR) window, and voltage indicator
• Output contactor, output sine-wave filter, or output sine-wave filter
with contactor
For a full list of features available on the configured input and output bays, see
the Catalog Number Explanation on page 15
.
Product Advisories Read the following precautions before you begin installation of the product.
Qualified Personnel
IMPORTANT
New configurations are continually added to the list of available
configured to order options. If your product has a configuration or
features not covered in this publication, see the schematics and
drawings that came with your product.
ATTENTION: Only qualified personnel familiar with adjustable frequency AC drives and associated machinery should plan or
implement the installation, startup, and subsequent maintenance of the system. Failure to comply can result in personal
injury and/or equipment damage.
To Next Page
Loading...
Need help?
General
