26 Rockwell Automation Publication 750-TG101A-EN-P - June 2022
Chapter 2 Preventative and Predictive Maintenance
Predictive Maintenance
PowerFlex 755TS Products with TotalFORCE Control contain algorithms for
predictive maintenance that are used to improve the uptime of machines,
processes, and facilities. These algorithms monitor the lifespan of certain
components and display the percentage of remaining life and the number of
hours or counts of remaining life in specific parameters or a software
interface. These algorithms can be used to alert personnel when the
components are nearing the end of their lifespan so the components can be
replaced before they fail. For an overview of predictive maintenance, see the
Predictive Maintenance section in the PowerFlex 750-Series Products with
TotalFORCE Control Reference Manual, publication 750-RM100
.
The predicted remaining life of components appears on the Predictive
Maintenance page in these software applications:
• Connected Components Workbench
• Studio Logix 5000 Designer
Figure 10
provides an example of a Predictive Maintenance page for a drive.
Figure 10 - Connected Components Workbench - Predictive Maintenance Page Example
IMPORTANT Failure to address predictive maintenance alarms can cause unexpected
downtime or premature product failure.
To Next Page
Loading...
Need help?
General
