Siemens SIMOTION Series User Manual

The following settings are possible:
● Enabled
An automatic restart of the SIMOTION P Runtime is performed at the start of the
SIMOTION P320-4 with withdrawn CFast card or for a CFast card withdrawn during
operation.
The automatic restart of the SIMOTION P Runtime for the Enabled default setting is
performed when the CFast card is inserted.
Figure 9-5 Administration tab - Automatic Restart By Plug-In External Memory Card
● Disabled
The automatic restart of the SIMOTION P Runtime is prevented after inserting the CFast
card.
Note
Behavior with withdrawn CFast card
Further information on the behavior of the SIMOTION P320-4 with withdrawn CFast card
can be found in Section Automatic restart of the SIMOTION P Runtime (Page 86).
9.3.4.3 Runtime Network Connections
The Ethernet interface of the SIMOTION P320‑4 is displayed here. It can be addressed via
the SIMOTION P Runtime.
Parameter assignment/addressing
9.3 SIMOTION P control manager
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 11/2016 133

Siemens SIMOTION Series Specifications

General

Brand	Siemens
Model	SIMOTION Series
Category	Controller
Language	English