Siemens SIMOTION Series User Manual

Procedure
Proceed as follows to restore the delivery status of SIMOTION P320-4:
1. First, terminate SIMOTION P320-4 via the Terminate SIMOTION P button of the SIMOTION
P State application.
2. Then select Extras > Reset to factory default in the menu.
Figure 11-1 Restoring the delivery status
NOTICE
Note the consequences of user changes!
All data and settings for SIMOTION P320-4 changed by the user will be deleted!
The settings made using the Station Configurator will also be reset to the delivery status.
11.2.3 Reset SIMOTION P320-4 to the initial state
If an error occurred during parameter assignment, download, or when other settings were
configured or if you are not sure whether you have specified all the information correctly, it
may be useful or necessary to reset the SIMOTION P320-4 to its state prior to parameter
assignment.
Requirements
You have saved an image of the memory medium on a remote computer/remote medium.
Service and maintenance
11.2 Restoring factory settings
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 11/2016 183

Siemens SIMOTION Series Specifications

General

Brand	Siemens
Model	SIMOTION Series
Category	Controller
Language	English