You can now use this image to reset the SIMOTION P320-4 to the factory settings. Note that
the changes made on the SIMOTION P320-4 will be lost in the process.
NOTICE
Retain data
Once the image has been loaded, the user may have to delete the retain data.
Procedure
Use the Restart (Del. SRAM) function from the SIMOTION P State application to reset.
Further information
Function elements (SIMOTION P State) (Page 122)
11.3 Upgrading runtime and firmware
As of the SIMOTION P320‑4 Box, the current software version is always supplied. The previous
version is available on the included restore DVD.
The upgrade to the latest hotfix (HF) can be performed via a setup.
Procedure
Possible types of upgrade:
● Upgrade with external DVD drive.
First, the upgrade software must be copied to an external DVD or USB memory stick.
● Upgrade using a remote computer in the network (connect the SIMOTION P320‑4 to the
drive of the remote computer via the network)
Start the upgrade by calling the Setup.exe file.
See also
Further information on upgrading can be found in the following documentation:
● Updating SIMOTION devices
● SIMOTION online help
Service and maintenance
11.3 Upgrading runtime and firmware
SIMOTION P320-4 E / P320-4 S
184 Commissioning and Hardware Installation Manual, 11/2016
To Next Page
Loading...
Need help?
General
