7.6 PP 72/48D PN
7.6.1 Description
Features
The I/O module is a simple module (without a separate enclosure) for connecting digital and
analog input/outputs as part of an automation system based on PROFINET IO.
The module has the following important features:
● 72 digital inputs and 48 digital outputs
● PLC I/O Interface connection (max. 100 MBaud)
● On-board status display via two diagnostic LEDs
● The three plug-in connectors for the digital inputs and outputs are 50-pin terminal posts for
connecting ribbon cables.
● The use of terminal strip converters or the direct connection of distribution boards is
possible.
● Analog signal cables can be connected directly to screw contacts on the module.
An external power supply unit (24 VDC) is required to supply the module and the digital outputs.
Connectable components
7.6 PP 72/48D PN
PPU
166 Manual, 01/2014, 6FC5397-2DP40-3BA3
To Next Page
Loading...
Need help?
General
