2.8 Ordering data
Ordering data of the components
SINUMERIK 828D is generally marketed in sales packages with drives, motors and
accessories. For orders, please contact your local Siemens sales representative.
Table 2-1 Components
Designation Article number
Panel Processing Unit without system software
● PPU 241.3 BASIC horizontal 6FC5370-3AA30-0AA0
● PPU 240.3 BASIC vertical 6FC5370-4AA30-0AA0
● PPU 261.3 horizontal 6FC5370-5AA30-0AA0
● PPU 260.3 vertical 6FC5370-6AA30-0AA0
● PPU 281.3 horizontal 6FC5370-7AA30-0AA0
● PPU 280.3 vertical 6FC5370-8AA30-0AA0
CompactFlash card with system software and license
● For PPU 241.3 / PPU 240.3: Turning 6FC5835-1GY40- YA0
● For PPU 241.3 / PPU 240.3: Milling 6FC5835-2GY40- YA0
● For PPU 261.3 / PPU 260.3: Turning 6FC5834-1GY40- YA0
● For PPU 261.3 / PPU 260.3: Milling 6FC5834-2GY40- YA0
● For PPU 281.3 / PPU 280.3: Turning 6FC5833-1GY40- YA0
● For PPU 281.3 / PPU 280.3: Milling 6FC5833-2GY40- YA0
Axis extension:
● Numeric Control Extension NX10.3 6SL3040-1NC00-0AA0
Machine control panels:
● MCP 483C PN 6FC5303-0AF22-0AA1
● MCP 310C PN 6FC5303-0AF23-0AA1
Interface module
● MCP Interface PN 6FC5303-0AF03-0AA0
Mini handheld unit:
● With spiral connection cable 6FX2007-1AD03
● With straight cable 6FX2007-1AD13
I/O modules:
● PP 72/48D PN (digital) 6FC5311-0AA00-0AA0
● PP 72/48D 2/2A PN (analog) 6FC5311-0AA00-1AA0
System description
2.8 Ordering data
PPU
Manual, 01/2014, 6FC5397-2DP40-3BA3 27
To Next Page
Loading...
Need help?
General
