Sony XVS-9000 Service Manual

4-11. CN-4019 Board
Preparation
1. Remove the front panel. (Refer to “4-2. Front Panel”)
2. Remove the front board. (Refer to “4-6. Front Board”)
Tip
Remove as many front boards as needed to easily remove the screws for removing of the SW panel.
3. Remove the SW panel. (Refer to “4-10. CN-4018 Board”)
Procedure
1. Remove the screw, then remove the CN-4019 board.
PSW3 x 6
CN-4019 board
Note
Tighten the screw, after install the SW panel. (Refer to “4-10. CN-4018 Board”)
2. Install the removed parts by reversing the steps of removal.
XVS-9000-C/XVS-8000-C/XVS-7000-C/XVS-6000-C
4-24

Sony XVS-9000 Specifications

General

DVE Channels	Up to 32 channels
Power Supply	Dual redundant power supply
Multi-format Support	Yes
M/E Busses	Up to 8
Mix Effects	Up to 8 M/E
Keyers per M/E	8
Frame Synchronizers	Built-in on all inputs
Format Converter	Built-in
Control Panel	Dedicated control panel