Steris AMSCO 7053HP User Manual

6 — Routine Maintenance
161
10432589_G AMSCO® 7000 Series
Operator Manual
10. Press Save on touch screen to keep new setting.
11. Press Start to begin test. Filling starts.
NOTE: Once test is completed, display shows the estimated water inlet pressure and temperature in
washer/disinfector.
6.16 Verifying Emergency Stop Pushbuttons
See Figure 6-3 and Figure 6-4.
Verify Emergency Stop pushbuttons as follows:
1. When washer/disinfector is idling, press Emergency Stop pushbutton located on load side of
washer/disinfector.

Steris AMSCO 7053HP Specifications

General

Brand	Steris
Model	AMSCO 7053HP
Category	Washer
Language	English