Steris AMSCO 7053HP User Manual

7 — Troubleshooting
183
10432589_G AMSCO® 7000 Series
Operator Manual
7.50 WATER LEAKS FROM WASHER/DISINFECTOR
Condition
Water leaks from washer/disinfector.
General Troubleshooting
Additional Information
Door gasket is dirty.
1. Verify if one of door gaskets is dirty. Clean door
gasket (refer to Section 6.5, Cleaning Door Gasket).
Spray gasket arms are not properly turning.
1. Visually ensure spray arms are properly turning,
shooting to door gasket.
Piping is leaking.
1. Verify piping is leaking, contact STERIS.
7.51 ALARM# 1 LOAD DOOR OPEN (CRITICAL)
Condition
Alarm is triggered when load door is detected as open during process.
General Troubleshooting
Additional Information
Load door is detected as open during process.
1. Press Silence Buzzer on touch screen to stop alarm
buzzer.
2. Press Ack on touch screen to acknowledge alarm.
3. Press Abort on touch screen to abort cycle.
4. Repeat cycle.
5. If situation reoccurs, contact STERIS.
7.52 ALARM# 2 UNLOAD DOOR OPEN (CRITICAL)
Condition
Alarm is triggered when unload door is detected as open during process.
General Troubleshooting Additional Information
Unload door is detected as open during process.
1. Press Silence Buzzer on touch screen to stop alarm
buzzer.
2. Press Ack on touch screen to acknowledge alarm.
3. Press Abort on touch screen to abort cycle.
4. Repeat cycle.
5. If situation reoccurs, contact STERIS.

Steris AMSCO 7053HP Specifications

General

Brand	Steris
Model	AMSCO 7053HP
Category	Washer
Language	English