Steris AMSCO 7053HP User Manual

7 — Troubleshooting
172
Operator Manual
AMSCO® 7000 Series 10432589_G
7.20 TRANSFER DOES NOT OCCUR BETWEEN CONVEYORS AND CHAMBER
Condition
Transfer does not occur between conveyors and chamber.
General Troubleshooting Additional Information
Communication cable is not connected between
washer/disinfector and conveyors.
1. Contact STERIS.
Faulty communication between washer/disinfector and
conveyors.
1. Contact STERIS.
7.21 GENERATED PRINTOUT IS LIGHT OR BLANK, OR PARTS OF CHARACTERS ARE MISSING
Condition
Generated printout is light or blank, or parts of characters are missing.
General Troubleshooting Additional Information
Printer paper not installed properly.
1. Reinstall printer paper.
Printer ribbon cartridge life ended.
1. Replace ribbon cartridge.
Printer is defective.
1. Contact STERIS.
7.22 PAPER IS NOT TAKEN UP INTO POWER TAKE-UP
Condition
Paper is not taken up into power take-up.
General Troubleshooting
Additional Information
Paper jammed.
1. Open printer cover, adjust paper path and close
cover.
Printer motor or roller defective.
1. Contact STERIS.

Steris AMSCO 7053HP Specifications

General

Brand	Steris
Model	AMSCO 7053HP
Category	Washer
Language	English