3
1.2 Installation Safety
Make sure there is no electrical connection before installation.
Make sure to avoid the water and electricity wiring in the wall before drilling.
Improper installation may cause personal injury!
• When moving the product, be aware of the product weight and keep the balance
to prevent it from tilting or falling.
Before operating the product, please check and ensure that tools to be used have
been maintained regularly.
1.3 Electrical Connection Safety
Before electrical connections, please make sure that the product is not damaged.
Otherwise, it may cause danger!
Before electrical connections, please make sure that the product switch and all
switches connected to the product are set to "OFF", otherwise electric shock may
occur!
• Be sure to use special insulation tools during cable connections.
• Note and observe the warning labels on the product, and perform operations
strictly following the safety instructions.
• Respect all safety precautions listed in this manual and other pertinent
documents.
User Manual 1 Safety Instructions
To Next Page
Loading...
Need help?
General
