40
Step 6 Configure forwarding service.
After all devices have been added, configure the forwarding service of the Logger1000, to
ensure that the Logger1000 can forward the data to upstream devices. Refer to the chapter
"7.10.6 iSolarCloud"~"7.10.9 Third-party portal".
- - End
7.6 Overview
7.6.1 General Information
Click “Overview→General information” to enter the corresponding interface.
Shortcut menu
Device setup: support of auto search and add device functions. Click the menu to add, de-
lete, modify, and view the device or perform auto search operation to search the device to
which address will be automatically allocated. Refer to the chapter "7.8.1 Device List".
Network management: set Ethernet parameters. Refer to the chapter "7.10.11 Port
Parameter".
Transfer configuration: transfer the data connected by the system to the background. Refer
to the chapter "7.10.6 iSolarCloud"~"7.10.9 Third-party portal".
System maintenance: support of operations such as system upgrade, log export, and re-
booting. Refer to the chapter "7.10.2 System Maintenance".
Data Index
Information such as today yield, total yield, real-time active power, and number of offline de-
vices can be viewed.
Click the button Expand to view more information.
Inverter Real-time Values
Information on the inverter such as state, daily yield, active power, and reactive can be
viewed.
7.6.2 Current Alarms
Click “Overview→Current alarms” to view the device fault information.
Information such as device name, alarm name, alarm type, alarm time, fault code, and fault
ID can be viewed.
7 WEB Interface User Manual
To Next Page
Loading...
Need help?
General
