Sungrow Logger1000B User Manual

72
Step 2 Set the active control mode to Disable Derating and click Save.
- - End
8.3.1.2 Remote power control
When the instruction source is IEC104 or MODBUS TCP protocol, set the active control
mode to Remote power control.
Step 1 Click “Power control→Active power” to enter the active power interface.
Step 2 Set the active control mode to Remote power control.
8 Grid Dispatching Function User Manual

Sungrow Logger1000B Specifications

General

Brand	Sungrow
Model	Logger1000B
Category	Data Loggers
Language	English