Sungrow Logger1000B User Manual

53
7.10.4 Message Export
Step 1 Click “System→Message Export” to enter the corresponding interface.
table 7-4 Parameter description
Parameter
Description Range
Port
-
Serial port: COM1、COM2、COM3
Network port: ETH, WiFi, Mobile
Network
Duration
Export the message re-
corded during the set time
1min ~ 10min
Step 2 Set parameters, including Port, Serial Port, and Duration, and click Start to start recording
message. The recording automatically stops when the set time reaches, or the user may
manually click the button Stop to stop recoding message.
Step 3 Click Export to export the message.
- - End
7.10.5 System Time
Click the System Time to check whether the current system time is correct, synchronize the
system time, and enable/disable "Inverter Timing".
Click “System→System Time” to enter the corresponding interface.
User Manual 7 WEB Interface

Sungrow Logger1000B Specifications

General

Brand	Sungrow
Model	Logger1000B
Category	Data Loggers
Language	English