Sungrow Logger1000B User Manual

11
3.2 Identifying the Logger1000
The type and key technical parameters of the Logger1000 can be found on the nameplate.
The nameplate is attached to the back of the Logger1000, shown by A in the figure below.
The nameplate contains important parameters. Ensure it is intact and clearly
legible.
3.3 Checking upon Receiving
The Logger1000 is thoroughly inspected and packed before delivery, but damage may be
still caused during transport. Check the following items carefully once receiving the
Logger1000.
• Check the scope of delivery for completeness according to"3.1 Scope of Delivery"
• Ensure that the device type is correct.
• Check the device thoroughly and ensure there are no visible damages.
If there are any problems, contact SUNGROW or the forwarding company.
Only undamaged Logger1000 can be installed and commissioned. Before installa-
tion, ensure that:
• The Logger1000 is intact without any damages.
• Related documents, such as quick user manual, are enclosed.
3.4 Storage
If the Logger1000 is not to be installed immediately after receiving, observe the following re-
quirements to store it properly:
• The Logger1000 should be store in its original packing case and placed in a wellventi-
lated, dry, and tidy room.
• The storage carrier should be suitable for the weight of the Logger1000.
User Manual 3 Unpacking and Storage

Sungrow Logger1000B Specifications

General

Brand	Sungrow
Model	Logger1000B
Category	Data Loggers
Language	English