4
Damage to the product caused by incorrect wiring is not covered by the warranty.
• Electrical connection must be performed by professionals.
• Check the power cord and confirm that the identifier is correct before connect-
ing it.
• All cables used shall comply with the requirements of local laws and regula-
tions, and must be firmly attached, properly insulated, and adequately
dimensioned.
Comply with the regulations related to the local grid during wiring.
1.4 Operation Safety
• When the product is running, do not touch its enclosure.
• When the product is running, do not touch any wiring terminal of the product.
Otherwise, electric shock may occur.
• When the product is running, do not disassemble any parts of the product. Oth-
erwise, electric shock may occur.
1.5 Maintenance Safety
Unauthorized modification or use of parts not sold or recommended by SUNGROW
may result in fires and electric shocks.
To prevent misuse or accidents caused by unrelated personnel, post prominent
warning signs or demarcate safety warning areas around the product to prevent
accidents caused by misoperation.
1 Safety Instructions User Manual
To Next Page
Loading...
Need help?
General
