Sungrow Logger1000B User Manual

39
7.5 Operation Procedure
Perform the following operations before logging into the Logger1000 Web for the first time.
Step 1 Complete the electrical connections.
Ensure that the Logger1000 has been correctly connected to other devices. Refer to the
chapter "5 Electrical Connection".
Step 2 Configure serial ports of the Logger1000.
After logging into the Web, first configure the serial ports of the Logger1000, to ensure that
the Logger1000 can normally communicate with upstream devices. Refer to the chapter
"7.10.11 Port Parameter".
Step 3 Calibrate the system time.
Check whether the current system time is correct, and perform manual time synchronization
or automatic time synchronization when necessary. Refer to the chapter "7.10.5 System
Time".
Step 4 Automatically search the device.
Devices that can be automatically searched, such as SUNGROW string inverter, can be
added via the auto search function with addresses allocated automatically. Refer to the
chapter "7.8.1 Device List".
Step 5 Add the device. Refer to the chapter "7.8.1 Device List".
User Manual 7 WEB Interface

Sungrow Logger1000B Specifications

General

Brand	Sungrow
Model	Logger1000B
Category	Data Loggers
Language	English