EasyManuals Logo
Home>Suzuki>Offroad Vehicle>LT-A400

Suzuki LT-A400 Service Manual

Suzuki LT-A400
502 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #186 background imageLoading...
Page #186 background image
1G-21 Fuel System:
Float Height Inspection and Adjustment
B827H11706031
Inspect and adjust the float height in the following
procedures:
1) Remove the carburetor assembly. Refer to
“Carburetor Assembly Removal and Installation
(Page 1G-17)”.
2) Remove the float chamber body. Refer to
“Carburetor Disassembly (Page 1G-17)”.
3) To check the float height, tilt the carburetor as
shown.
4) Measure the float height “a” while the float arm is just
contacting the needle valve using vernier calipers.
Bend the tongue “A” as necessary to bring the float
height “a” to the specified level.
Special tool
: 09900–20102 (Vernier calipers (1/20 mm,
200 mm))
Float height “a”
17.0 ± 1.0 mm (0.67 ± 0.04 in)
5) Reinstall the float chamber body. Refer to
“Carburetor Assembly (Page 1G-20)”.
6) Reinstall the carburetor assembly. Refer to
“Carburetor Assembly Removal and Installation
(Page 1G-17)”.
Carburetor Inspection and Cleaning
B827H11706032
Refer to “Carburetor Assembly (Page 1G-20)” and
“Carburetor Disassembly (Page 1G-17)”.
Carburetor Parts
Check the following items for any damage or clogging.
If they are clogged, clean the fuel passage.
Slow jet
Main jet
Main air jet
Slow air jet
Needle jet holder air bleeding holes
Float
Jet needle
Valve seat
Piston valve
Starter (enricher) jet
•O-rings
Throttle valve
Diaphragm
Pilot outlet and by-pass ports
Needle Valve
Check the needle valve for damage or worn.
If foreign matter is caught between the valve seat and
the needle valve, the gasoline will continue flowing and
overflow. If the valve seat and needle valve are worn
beyond the permissible limits, similar trouble will occur.
Conversely, if the needle valve sticks, the gasoline will
not flow into the float chamber. Clean the float chamber
and float parts with gasoline. If the needle valve is worn,
as shown in the illustration, replace it along with a new
valve seat.
Throttle Valve
Check the throttle valve moves smoothly from full open
to full close. If it does not smoothly, clean the carburetor.
“a”
I827H1170014-01
“A”
I827H1170015-01
CORRECT INCORRECT
I649G1170060-02

Table of Contents

Other manuals for Suzuki LT-A400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Suzuki LT-A400 and is the answer not in the manual?

Suzuki LT-A400 Specifications

General IconGeneral
BrandSuzuki
ModelLT-A400
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals