Suzuki LT-A400 Service Manual

3B-23 Differential:
• Install the final gear case assembly to the frame.
• Apply thread lock to the rear axle housing mounting
nuts and tighten the nuts to the specified torque.
: Thread lock cement 99000–32030
(THREAD LOCK CEMENT SUPER 1303 or
equivalent)
Tightening torque
Rear axle housing mounting nut (swingarm) (b):
60 N·m (6.0 kgf-m, 43.5 lb-ft)
• Adjust the rear brake pedal free travel. Refer to “Rear
Brake Pedal / Rear Brake (Parking Brake) Lever
Inspection and Adjustment in Section 0B (Page 0B-
16)”.
• Adjust the parking brake lever play. Refer to “Rear
Brake Pedal / Rear Brake (Parking Brake) Lever
Inspection and Adjustment in Section 0B (Page 0B-
16)”.
• Pour the final gear oil. Refer to “Final Gear Oil
Inspection in Section 0B (Page 0B-11)”.
Final Gear Assembly Disassembly and
Assembly
B827H13206017
Refer to “Final Gear Assembly Removal and Installation
(Page 3B-21)”.
Disassembly
1) Remove the O-rings (1).
2) Unlock the final gear coupling nut.
3) Remove the final gear coupling (2) with the special
tool.
Special tool
(A): 09924–64510 (Final driving gear
coupling holder)
4) Remove the oil seal with the special tool.
Special tool
(B): 09913–50121 (Oil seal remover)
(b)
(b)
I827H1320072-01
1
1
I827H1320074-01
I827H1320075-01
(A)
2
I827H1320076-01
(B)
I827H1320077-01

Suzuki LT-A400 Specifications

General

Brand	Suzuki
Model	LT-A400
Category	Offroad Vehicle
Language	English