Suzuki LT-A400 Service Manual

1D-30 Engine Mechanical:
Cam Chain Tension Adjuster Inspection
B827H11406020
The cam chain tension adjuster is maintained at the
proper tension automatically.
1) Remove the cam chain tension adjuster. Refer to
“Engine Top Side Disassembly (Page 1D-10)”.
2) Check that the push rod slides smoothly when
releasing stopper (1). If it does not slide smoothly,
replace the cam chain tension adjuster with a new
one.
3) Install the cam chain tension adjuster. Refer to
“Engine Top Side Assembly (Page 1D-13)”.
Cam Chain Tensioner Inspection
B827H11406023
Inspect the cam chain tensioner in the following
procedures:
1) Remove the cam chain tensioner. Refer to “Engine
Top Side Disassembly (Page 1D-10)”.
2) Check the contacting surface of the cam chain
tensioner. If it is worn or damaged, replace it with a
new one.
3) Install the cam chain tensioner. Refer to “Engine Top
Side Assembly (Page 1D-13)”.
Cam Chain Guide Inspection
B827H11406022
Inspect the cam chain guide in the following procedures:
1) Remove the cam chain guides. Refer to “Engine Top
Side Disassembly (Page 1D-10)”.
2) Check the contacting surface of the cam chain
guide. If it is worn or damaged, replace it with a new
one.
3) Install the cam chain guide. Refer to “Engine Top
Side Assembly (Page 1D-13)”.
Cylinder Inspection
B827H11406030
Cylinder Distortion
Check the gasket surface of the cylinder for distortion
with a straightedge and thickness gauge, taking
clearance readings at several places as indicated. If the
largest reading at any position of the straightedge
exceeds the limit, replace the cylinder.
Special tool
: 09900–20803 (Thickness gauge)
Cylinder distortion
Service limit: 0.05 mm (0.002 in)
1
I827H1140081-01
I827H1140082-01
I827H1140083-01
I827H1140084-01

Suzuki LT-A400 Specifications

General

Brand	Suzuki
Model	LT-A400
Category	Offroad Vehicle
Language	English