General Information: 0A-10
Specifications
Specifications
B827H10107001
NOTE
These specifications are subject to change without notice.
LT-A400/F
Dimensions and dry mass
Engine
Drive train
Item Specification Remark
Overall length
2 160 mm (85.0 in) P-17, 24
2 060 mm (81.1 in) P-28, 33
Overall width
1 200 mm (47.2 in) P-17, 24
1 145 mm (45.1 in) P-28, 33
Overall height 1 220 mm (48.0 in)
Wheelbase 1 270 mm (50.0 in)
Ground clearance 250 mm (9.8 in)
Seat height 840 mm (33.1 in)
Dry mass
252 kg (555 lbs) LT-A400
272 kg (599 lbs) LT-A400F(P-17)
275 kg (606 lbs) LT-A400F(P-24)
268 kg (590 lbs) LT-A400F(P-28, 33)
Front track 880 mm (34.6 in)
Rear track 900 mm (35.4 in)
Item Specification Remark
Type 4-stroke, Air-cooled with SACS, OHC
Number of cylinders 1
Bore 82.0 mm (3.228 in)
Stroke 71.2 mm (2.803 in)
Displacement 376 cm
3
(22.9 cu.in)
Compression ratio 9.0 : 1
Carburetor KEIHIN CVK32, single
Air cleaner Polyurethane foam element
Starter system Electric and recoil starter
Lubrication system Wet sump
Idle speed 1 500 ± 100 r/min
Item Specification Remark
Clutch Wet shoe, automatic, centrifugal type
Transmission Automatic variable ratio (V-belt)
Transfer 2-speed forward with reverse
Gearshift pattern
Transmission Automatic
Transfer L-H-N-R (Hand operated)
Primary reduction ratio
(Automatic drive)
2.938 – 0.813 (Variable change)
Secondary reduction ratio 2.730 (42/19 x 21/17)
Final reduction ratio (Front & Rear) 3.600 (36/10)
Transfer gear ratio
Low 2.500 (40/16)
High 1.375 (33/24)
Reverse 2.125 (34/16)
Drive system Shaft drive
To Next Page
Loading...
Need help?
General
