Service introduction
Strategy for s
ervicing
Throughout this manual, the term module appears, referring to any
field-replaceable component or as sembly. References to a module are different
than referen
ces to a product module such as “AGL7 module” which is a product
installed in the TG8000 mainframe.
This manual
contains all the information needed for periodic maintenance of
the TG8000 m ainframe and installed product modules. (Examples of such
information are procedures for performing adjustments.)
Further, the manual contains information for corrective maintenance down to
the module level. To isolate a failure, use the fault isolation procedures found
in the troubleshooting sections for the mainframe and product modules. To
remove and replace any failed module, follow the instructions in the removal
procedure sections for the mainframe and product modules. After isolating a
faulty m
odule, replace it with a fully-tested module obtained from the factory. Use
the replaceable parts list sections for the mainframe and product modules for part
numbers and ordering information for all replaceable modules.
Tektronix service offerings
Tektronix provides service to cover repair under warranty and other services that
may provide a cost-effective answer to your service needs.
Whether providing warranty repair service or any of the other services listed
below, Tektronix service technicians are well trained to service the TG8000
generator. They have access to the latest information on improvements to the
TG8000 and the latest new options.
Wa
rranty repair service
Tektronix warrants this product for one year from date of purchase. The warranty
appears after the title page in this manual. Tektronix technicians p rovide warranty
service at most Tektronix service locations. The Tektronix p roduct c atalog lists all
w
orldwide service locations or you can visit our Web site for service information:
www.tektronix.com.
Self service
Tektronix supports repair to the module level by providing module exchange.
Module exchange. This service reduces downtime for repair by allowing you to
exchange most modules for remanufactured ones. Each module comes with a
90-day service warranty.
For more information. Contact your local Tektronix service center or sales
engineer for more information on any of the repair or adjustment services just
described.
1–2 TG8000 Multiformat Test Signal Generator Service Manual
To Next Page
Loading...
Need help?
General
