Tektronix TG8000 Service Manual

Module installation and removal
4. Insert the modu
le into the slot, paying attention to the module orientation.
(See Figure 1-3.) Push the module into the slot until the connector board of
the module is firmly engaged with the Main board of the mainframe.
Figure 1-3: Installing a module
5. Tighten the two screws to secure the module to the mainframe. (See
Figur
e1-4.)
Figure 1-4: Securing a module
TG8000 Multiformat Test Signal Generator Service Manual 1–13

Tektronix TG8000 Specifications

General

Brand	Tektronix
Model	TG8000
Category	Portable Generator
Language	English