Mainframe replaceable parts list
Mainframe rep
laceable parts list
This section
contains a list of the replaceable modules for the TG8000 mainframe.
Use this list to identify and order replacement parts.
Parts ordering information
Replacement parts are available through your local Tektronix fi eld office or
representative.
Changes to Tektronix products are sometimes made to accommodate improved
components as they become available and to give you the benefit of the latest
improvements. Therefore, when ordering parts, it is important to include the
following information in your order.
Part number (see Part Number Revision Level below)
Instrument type or model number
Instrument serial number
Instr
ument modification number, if applicable
If you order a part that has been replaced with a different or improved part, your
loca
l Tektronix field office or representative will contact you concerning any
change in part number.
Part number rev ision level
Tektronix part numbers contain two digits that show the revision level of the
par
t. For most parts in this manual, you will find the letters XX in place of the
revision level number.
When you order parts, Tektronix will provide you with the most current part for
your product type, serial number, and modification (if applicable). At the time of
your order, Tektronix will determine the part number revision level needed for
your product, based on the information you provide.
TG8000 Multiformat Test Signal Generator Service Manual 2–35
To Next Page
Loading...
Need help?
General
