Valtra F Series User Manual

Procedure
1. Set the battery cut-o switch to OFF.
2. Remove the dashboard cover.
GUID-1B15357E-1844-4A55-9707-521779B4ABBC-high.jpg [High]
Fig. 21
3. Disconnect the connector (C).
4. Remove the fastener (A) and remove the
starter relay (B).
5. Install in opposite sequence.
IMPORTANT:
When the battery cut-o switch is ON, wait
10 seconds before you turn the ignition
switch.
GUID-DB4341B1-16B7-4708-A448-930E6C9EC504-low.png [Low]
Fig. 22
4.2.4 Direction indicator relay
Removal
1. Disconnect the battery.
2. Remove the right top dashboard housing.
3. Loosen the screw (A).
4. Disconnect the connector (C).
5. Remove the direction indicator relay (B).
Installation
6. Connect the connector (C).
7. Install the direction indicator relay (B).
8. Install the screw (A).
9.
Connect the battery.
10. Do a check of the direction indicators.
GUID-DB4341B1-16B7-4708-A448-930E6C9EC504-low.png [Low]
Fig. 23
GUID-8792CD49-4667-404F-9267-9117E3B0A25C [V1]
4. Maintenance
F Series 155
39940211 (555124)

Valtra F Series Specifications

General

Brand	Valtra
Model	F Series
Category	Tractor
Language	English