GUID-6DA9BBF7-4EF1-4D11-BCFC-DE41E019BA29-high.jpg [High]
Fig. 107
Remove the oil filler cap.
Fill with the specified fluid and volume (see the "Lubricants and additives" and "Capacities" section).
Install the oil filler cap.
4.12.18 Change the oil suction strainer
Drain the Transmission hydraulic oil.
Remove the four clamps (B) and the two hoses
(C).
Replace the strainer (D) with a new one. Make
sure that the arrow on the strainer body points
forward.
Re-install the clamps.
Refill transmission oil.
GUID-282D3A14-9C55-4208-9551-5C137D4EC685-low.png [Low]
Fig. 108
GUID-FED09DF1-43D6-4C99-85F9-C7F02750780E [V1]
4. Maintenance
200 F Series
39940211 (555124)