Valtra F Series User Manual

Do not operate the controls during the regeneration procedure. The control unit adjusts the engine and
engine speed sets automatically to 1500 rpm. The regeneration procedure stops immediately if you
operate the controls manually.
3.1.10 Language and measurement units settings
Select a unit of measurement
Operation Procedure
Open the "UNITS"
menu.
Press (1) for 1 second.
Open the submenu. Press (2) for 1 second.
Navigate the units. Press (1) and (2).
Change the units. Press (1) for 1 second.
Select the units. Press (1) or (2).
Save the selection. Press (1) for 1 second.
Close the menu. Press (2) for 1 second.
An arrow shows to identify the selection.
Do the same procedure for all the other units.
GUID-3D6E2B0C-98B1-453C-BB4F-F3FBDB8F0DEE-high.jpg [High]
Fig. 39
Language
Select a language.
Speed
Select km/h or mph modes.
Temperature
Select °C or °F modes.
Power
Select kW or hp modes.
3.1.11 Fault code menus
NOTE:
Stop the machine and engage the parking brake before you open the menu. The menu closes automatically
if the vehicle moves.
Functions of the digital display controls
(1) (2)
Press for a maximum of 0.3
seconds:
Up Down
Press for a minimum of 1 second: Select Open and close the submenu
GUID-1971D34C-A525-4323-924C-98308595FC5C [V1]
GUID-156C0DDB-7401-4105-A20B-03BFF33B705B [V1]
3. Operation
72 F Series
39940211 (555124)

Valtra F Series Specifications

General

Brand	Valtra
Model	F Series
Category	Tractor
Language	English