4.10 Tractor Jacking Points
WARNING:
Equipment failure could cause accident or injury! Only use rigging equipment that has the
capacity to lift the loads that you are moving. Always check the rigging equipment each
day for damaged or missing parts. Make sure other workers or bystanders are not under
the load while it is moving. Failure to comply could result in death or serious injury.
WARNING:
Jack stands can slip or fall over. Dropping, tipping, or slipping of machine or its
components is possible. DO NOT work under a vehicle supported by jack stands only. Park
the tractor on a level surface. Block the wheels. Support the machine with safety stands.
Failure to comply could result in death or serious injury.
WARNING:
Unexpected machine movement! If you are supporting any wheel(s) of a four wheel drive
machine on a jack stand, NEVER attempt to start the engine or rotate a wheel. The wheels
could move, causing the machine to fall from the stand. Instead, support all the wheels so
they are just clear of the ground. Failure to comply could result in death or serious injury.
Use wooden wedges (1) to prevent the front axle
from tilting.
GUID-613D7036-D931-4E97-A1DF-6291CF900657-low.png [Low]
Fig. 61
Recommended lifting points (1) to raise the rear of
the tractor (e.g. for removing the rear wheels).
GUID-F5348A39-77A5-41BC-A7EC-2AD4E953B734-low.png [Low]
Fig. 62
GUID-E3E05EE2-CB23-43DD-BBB3-36F647105A89 [V2]
4. Maintenance
176 F Series
39940211 (555124)
To Next Page
Loading...
Need help?
General
