Valtra F Series User Manual

2. PTO switch (A).
a) Push the PTO switch (A) to engage the
PTO.
b) Turn the ignition switch to the engine
START position.
c) Turn the ignition switch to the ON
position.
The starter motor must not turn the engine.
Result
The starter motor must not turn the engine.
If the starter motor turned the engine, speak
to an approved service center.
GUID-DE31D597-63BF-41B7-A3D0-79DF30EE4200-high.jpg [High]
Fig. 81
3. Gear lever (B).
a) Move the gear lever (B) out of the neutral
position.
b) Turn the ignition switch to the engine
START position.
c) Turn the ignition switch to the ON
position.
Result
The starter motor must not turn the engine.
If the starter motor turned the engine, speak
to an approved service center.
GUID-53C36E35-9FD8-4BBB-BC59-2DA9136C0E5D-high.jpg [High]
Fig. 82
4.12.8 Check fan belt wear and tension
CAUTION:
Make sure that the engine is switched
o and that it is completely cold.
Check the belt wear and tension. The replacement
and tensioning must be done by an authorised
service centre.
GUID-5D44DD5B-B9B8-4010-9325-38807BC2514B-low.png [Low]
Fig. 83
4.12.9 Check air conditioning compressor belt wear and tension
CAUTION:
Make sure that the engine is switched o and that it is completely cold.
Check the wear and tension of the air conditioning compressor belt. The replacement and tensioning must
be done by an authorised service centre.
GUID-0D3E03AA-E521-4BFC-8605-7DA18E1789DC [V2]
GUID-3E6ABC42-0573-471D-ADDF-0447F13B8971 [V2]
4. Maintenance
F Series 189
39940211 (555124)

Valtra F Series Specifications

General

Brand	Valtra
Model	F Series
Category	Tractor
Language	English