NetSure
™
Control Unit (NCU)
User Manual, UM1M830BNA
Spec. No: 1M830BNA, 1M830DNA Code: UM1M830BNA
Model No: M830B, M830D Revision M, May 12, 2017
Clear Battery Test Fail Alarm: Clears a battery test fail alarm. The only selection is Yes. Once Yes is selected and confirmed, the
alarm clears.
Clear Discharge Curr: Clears a discharge current imbalance alarm. The only selection is Yes. Once Yes is selected and
confirmed, the alarm clears.
Time Settings Tab Programmable Parameter Descriptions
See also “Changing the Date and Time” on page 21.
Specify Time
o Get Local Time from Connected PC: Allows you to automatically set the time. When selected, the controller will get the
same time as the connected PC.
o Date & Time: Allows you to manually set the date and time.
Local Zone (for synchronization with time servers): When selected, the controller will get the local zone automatically or you
can enter the zone.
Get time automatically from the following servers.
o When selected, the controller will get the time from the selected time server. The controller will also adjust the time per
the "Local Zone" setting.
To Next Page
Loading...
Need help?
General
