NetSure
™
Control Unit (NCU)
User Manual, UM1M830BNA
Spec. No: 1M830BNA, 1M830DNA Code: UM1M830BNA
Model No: M830B, M830D Revision M, May 12, 2017
Users Tab
You can add, edit, and delete Users. These are the Users that can log onto the controller both locally (local display access) or remotely
using the Web Interface.
Figure 77. Users Tab
Adding a User
1. Enter the User’s Name in the “User Name” field (8 characters maximum; the valid characters are 0-9, a-z, A-Z, and _).
2. Select the privilege of the User from those listed in the "Privilege" drop-down list box. See "User Privilege Level" below for a
description.
3. Enter an E-Mail address for this User.
4. Enter a password for this User in the "Password" field (13 characters maximum; the valid characters are 0-9, a-z, A-Z, and _).
Passwords must be at least six (6) characters long.
5. Re-enter the password for this User in the "Confirm" field.
6. Click the "Add" button to add the User.
NOTE: To reset the form (i.e. to start over) and erase all information entered, click on the “Reset” button.
Modifying an Existing User
1. Select the User to be modified from those listed in the "User Information” list.
2. Modify the parameters of this User in the "User Name", "Privilege ", “E-Mail”, and/or "Password" field.
3. Click the "Modify" button to modify the parameters of this User.
To Next Page
Loading...
Need help?
General
