Vertiv Netsure User Manual

NetSure
™
Control Unit (NCU)
User Manual, UM1M830BNA
Spec. No: 1M830BNA, 1M830DNA Code: UM1M830BNA
Model No: M830B, M830D Revision M, May 12, 2017
[19]
4. In the “Internet Options” window, select the Security tab.
5. Click on Trusted sites. With “Trusted sites” selected, click
“Sites”. The following window opens. Uncheck the
“Require server verification (https:) for all sites in the
zone:” box if https is not being used.
6. In the Trusted sites window, type or copy the NCU URL in
the “Add this website to the zone:” box.
7. Click Add. The NCU URL is listed in the Websites: box.
Click Close.
Logging into the Controller
Procedure
Internet Explorer, version 6 or newer, is supported (IE 8.0 is
recommended). Chrome, Safari, and Firefox are also supported.
1. In your browser, enter http:// and the controller’s IP
address (see “Connecting a Local Computer Directly to
the Controller when the System is NOT Equipped with an
IB4 Board” on page 16 or “Connecting a Local Computer
Directly to the Controller when the System IS Equipped
with an IB4 Board” on page 17) and press ENTER. If your
site requires secure HTTP and you were furnished with an
NCU configuration with secure HTTP, enter https:// and
the controller’s IP address and press ENTER.
2. The following Web Interface Login window opens. Enter
a valid User Name and Password, then click LOGIN.

Vertiv Netsure Specifications

General

Brand	Vertiv
Model	Netsure
Category	Control Unit
Language	English