To Next Page

To Previous Page

NetSure

™

Control Unit (NCU)

User Manual, UM1M830BNA

Spec. No: 1M830BNA, 1M830DNA Code: UM1M830BNA

Model No: M830B, M830D Revision M, May 12, 2017

[205]

TL1 AUTONOMOUS MESSAGES SUPPORTED (IN ALPHABETICAL ORDER)

This section lists the specific autonomous messages (in alphabetical order) the NCU supports. A brief description of each is provided.

NOTE: In autonomous messages, the fractional portion of the ATAG is not supported.

CANCEL SESSION

(TIMEOUT)

Referenced In: TR-TSY-000835, Issue 2; pg. 12.5-13

General Description: This is an automatic message transmitted by the NE (NCU) when an established session is terminated because of a

"timeout", i.e., no messages were exchanged for an interval equal the controller session timeout setting.

Message Format:

cr lf lf

^^^<sid>^<YY-MM-DD>^<HH:MM:SS> cr lf

A^^<atag>^CANC cr lf

<uid> cr lf ;

<uid>

This is the User whose session is terminated as a result of the timeout.

Vertiv Netsure User Manual

Other manuals for Vertiv Netsure