NetSure
™
Control Unit (NCU)
User Manual, UM1M830BNA
Spec. No: 1M830BNA, 1M830DNA Code: UM1M830BNA
Model No: M830B, M830D Revision M, May 12, 2017
SW Maintenance Tab
Allows you to perform software maintenance procedures.
Figure 82. SW Maintenance Tab
Auto Config Procedure
The auto configuration feature scans the system for intelligent equipment connected to controller (such as SMDU, IB and EIB) and
configures these into the controller automatically.
To start the auto configuration process, click on the "Auto Config" button.
Figure 83. Auto Config
To Next Page
Loading...
Need help?
General
