202 VW Golf & GTI Quick Reference Specication Book • September 2012
Ignition System
DTC Error Message Malfunction Criteria and
Threshold Value
P0300 Random Misre Detected • Emission threshold 1st interval
Misre Rate (MR), > 2.1%
• Catalyst damage misre rate
(MR), > 2.9% - 20%
P0301 Cylinder 1 Misre Detected • Emission threshold 1st interval
Misre Rate (MR), > 2.1%
• Catalyst damage misre rate
(MR), > 2.9% - 20%
P0302 Cylinder 2 Misre Detected • Emission threshold 1st interval
Misre Rate (MR), > 2.1%
• Catalyst damage misre rate
(MR), > 2.9% - 20%
P0303 Cylinder 3 Misre Detected • Emission threshold 1st interval
Misre Rate (MR), > 2.1%
• Catalyst damage misre rate
(MR), > 2.9% - 20%
P0304 Cylinder 4 Misre Detected • Emission threshold 1st interval
Misre Rate (MR), > 2.1%
• Catalyst damage misre rate
(MR), > 2.9% - 20%
P0321 Ignition/Distributor Engine
Speed Input Circuit Range/
Performance
• Comparison of counted teeth
vs. reference = incorrect
• Monitoring reference gap
failure
P0322 Ignition/Distributor Engine
Speed Input Circuit No Signal
• Camshaft signal > 3
• Engine speed = no signal
P0324 Knock Control System Error • Signal fault counter
(combustion) > 24
or
• Signal fault counter
(measuring window) > 2.00
P0327 Knock Sensor 1 Circuit Low
Input (Bank 1)
• Lower threshold < -70 V
or for signal range check
• Lower threshold < 0 - 2.1582 V
P0328 Knock Sensor 1 Circuit High
Input (Bank 1)
• Upper threshold > 1.00 V
or for signal range check
• > 29.0674 - 114.9023 V