OM ET18/20/24 us 1.3 * et18_20_24b510.fm 5-23
5
Hammer operation (option)
Information regarding hammer operation
Use the canopy version only with a shatter protection during hammer
operation.
– see chapter “ Shatter protection (option)” on page 4-25
Piercing/penetration hazard due to flying objects!
Causes severe injury or death.
► During operation, all persons must stay clear of the work area
of the machine.
► Do not place the machine directly underneath the workplace
during demolition, otherwise debris can fall onto the machine
or the building can collapse.
► All windows and doors must be closed if the machine is
equipped with a cab (option).
Accident hazard due to tipping over of the machine!
Can cause severe injury or death.
► During operation, all persons must stay clear of the work area
of the machine.
► Do not perform any demolition work under the machine. This
could cause the machine to tip over.
► The machine can lose its balance and tip over if a hammer or
other heavy attachment is used. Proceed as follows to
perform machine operation both on level ground and on
slopes:
► Never turn, lower or set down the attachment abruptly.
► Do not extend or retract the boom abruptly.
► Do not use the impact force of the attachment to perform
demolition work. Broken or falling debris can cause injuries,
damage to property or damage to the equipment.
► Machine travel is prohibited during hammer operation.
To Next Page
Loading...
Need help?
General
