7-20 OM ET18/20/24 us 1.3 * et18_20_24w700.fm
7
7.5 Cleaning and maintenance on or with the machine
Information regarding cleaning and maintenance on or with the machine
Cleaning the machine is divided into 3 separate areas:
• Inside the cab.
• Exterior of the machine.
• Engine compartment.
The wrong choice of cleaning equipment and agents can impair the
operating safety of the machine on the one hand, and on the other
undermine the health of the persons in charge of cleaning the machine.
Follow the information below:
Cleaning with washing solvents
• Ensure adequate room ventilation.
• Wear suitable protective clothing.
• Do not use flammable liquids, such as gas or diesel.
Cleaning with compressed air
• Work carefully.
• Wear safety glasses and protective clothing.
• Do not aim the compressed air at the skin or at other people.
• Do not use compressed air for cleaning your clothing.
Cleaning with a high-pressure cleaner or steam jet
• Cover electric parts.
• Do not directly expose electrical components and damping material to
the jet.
• Cover the vent filter on the hydraulic oil reservoir and the filler caps for
fuel, hydraulic oil etc.
• Protect the following components from moisture:
- Electrical components such as the alternator etc.
- Control devices and seals.
- Air intake filters etc.
Cleaning with volatile and easily flammable anticorrosion agents
and sprays:
• Ensure adequate room ventilation.
• Do not use unprotected lights or open flames.
• Do not smoke.
In order to avoid damage to the environment, clean the machine
only in wash bays and places provided to this effect.
To Next Page
Loading...
Need help?
General
