4-16 OM ET18/20/24 us 1.3 * et18_20_24i400.fm
4
Adjusting the rearview mirrors (option)
Injury hazard to persons in the danger zone!
Persons in the danger zone are possibly not seen and can be
injuried when reversing the machine.
► Adjust the existing visual aids (rearview mirrors, for example)
correctly.
► Interrupt machine operation immediately if persons enter the
danger zone.
Accident hazard due to restricted field of vision on the job
site!
Accidents resulting in severe injuries or death can be caused by
a restricted field of vision.
► Interrupt machine operataion immediately if persons enter the
danger zone.
► Take appropriate measures if necessary (camera, mirrors,
guide, for example).
► Additional equipment or attachments must not be installed if
they impair visibility.
Accident hazard due to incorrect adjustment of visual aids!
Incorrectly adjusted visual aids can result in severe injury or
death.
► Adjust the visual aids before putting the machine into
operation.
► Immediately replace damaged or broken visual aids.
► Curved mirrors enlarge, reduce or distort the field of view.
Bear this in mind when adjusting and using such mirrors.
Before using the machine, before starting machine operation or when
changing operators, ensure that all visual aids (mirrors, for example) work
correctly, that they are clean and adjusted in accordance with the
instructions in this Operator’s Manual. The operator must observe the
local regulations.
• Use safety-oriented ladders and work platforms for adjustment work on
the machine.
• Never use machine parts or attachments/superstructures as a climbing aid.
To Next Page
Loading...
Need help?
General
