OM ET18/20/24 us 1.3 * et18_20_24e300.fm 3-5
3
Fields of application and use of attachments
In order to avoid damage to the machine, only the attachments
listed below have been certified for installation on the machine.
► Contact a Wacker Neuson service center if you wish to use
other attachments.
Using attachments of other manufacturers, or attachments which have
been released for other machine types, can reduce the machine’s output
and stability considerably, and can also cause damage to the machine
and injuries to the operator or the personnel.
Always compare the weight of the attachment and its maximum payload
with the indications in the lift capacity/stability table. Never exceed the
maximum payload stated in the lift capacity/stability table.
Please refer to the Operator’s and maintenance manual of the
attachment manufacturer for using and performing maintenance
on attachments such as hammers, grabs, hydraulic quickhitch,
etc.
Description of attachment Weight Capacity Machine Remarks
Easy Lock quickhitch
19 kg
(42 lbs)
-- ET18
Required for operation of the
Wacker Neuson quickhitch
system.
-- ET 20
-- ET 24
Powertilt with Easy Lock
55 kg
(121 lbs)
-- ET 18
-- ET 20
-- ET 24
Backhoe bucket 250 mm (10 in)
30 kg
(66 lbs)
0.023 m
3
(0.81 ft
3
)
ET 18
Backhoe bucket 250 mm (10 in)
31 kg
(68 lbs)
0.023 m
3
(0.81 ft
3
)
ET 18 Easy Lock quickhitch
Backhoe bucket 250 mm (10 in)
34 kg
(75 lbs)
0.030 m
3
(1.06 ft
3
)
ET 20 Easy Lock quickhitch