9-38 OM ET18/20/24 us 1.3 * et18_20_24t900.fm
9
Safety instructions – stability table
The values of the stability table apply to lifting gear applications.
Crushing hazard due to tipping over of the machine.
Causes severe crushing or injury resulting in death.
► The authorized lift capacity specified in the stability table must
never be exceeded.
► Get informed on the lift capacity of the attachment before
using it.
► If an attachment with load hook or joint rod is installed, the
weight of the attachment must be subtracted from the lift
capacity specified in the table.
► Use the machine for lifting gear applications only if the
mandatory lifting gear (load hook, for example) and safety
equipment (optical and acoustic warning devices (safe load
indicator), stability table, hose burst valve, for example) is
installed, functional and enabled.
► Do not tilt the upper carriage (Vertical Digging System option).
► Do not retract the telescopic travel gear (option).
► Observe chapter Safety/Safety instructions regarding
lifting gear applications.
If the specified lift capacity is exceeded, possible damage to
property due to tipping over of the machine.
► The authorized lift capacity specified in the stability table must
never be exceeded.
The indications are only approximate values. Attachments,
uneven ground and soft or bad ground conditions affect lift
capacity. The operator must take these influences into account.
To Next Page
Loading...
Need help?
General
