RJ-901C/RJ-900C 　 Maintenance Manual 9 Troubleshooting
9-15
NOTE
• The square bracket pair in an error message contains the applicable ink color.
• If no ink and no cartridge occur at the same time, no cartridge message has priority to be displayed.
9.2.3 Data Errors
This section describes the message contents of data errors as well as the check items and recovery actions.
These errors are displayed when a communication error occurs between the PC and the machine.
Upon an occurrence of a data error, the machine stops its operation at the same time.
The error can be cancelled by removing the error causes. After that, the machine will restart its operation.
10 Out of memory
DIMM 64MB
Memory is
insufficient for
data analysis/
printing.
Required
memory size is
displayed.
1. Check RAM size
from "Test: Ram
Capacity" of self-
diagnosis function.
Memory size is as
follows.
901C: 128MB
900C: 256MB
If the displayed value is
less than the memory
size of the model, the
SODIMM may be
damaged.
Replace the SODIMM.
"5.4.1
Memory Size
Menu" p.5-10
2. Main board
assembly may be
damaged.
Replace main board
assembly.
"4.3.3
Replacing
Main Board
Assembly"
p.4-21
Table 9-3 Symptoms and Check Items for Errors with Message(Continued)
No. Message Event/
symptom
Check item Action Reference
To Next Page
Loading...
Need help?
General
