Xerox 8830 User Manual

8825/8830 DDS User Guide/3
Getting to know the 8825/8830 DDS
The Scanner
The Scanner unit contains a DDS User Interface and display, plus two other
operator-accessible controls: the Power On/ Off Switch and the
Forward/Reverse Switch. The Power On/ Off Switch applies and removes
AC power to the Scanner. The Forward/Reverse Switch is used mainly to
remove documents from the Scanner’s feed mechanism. There are no user
serviceable parts inside the scanner.
The 7346/7356 Scanner can scan images at the speeds shown in the table
below:
Table 1. Scanning Resolutions and Speeds
7356 7346
Mode DPI Pixel
Depth
Min
IPS/
cm/s
Max
IPS/
cm/s
Min
IPS/
cm/s
Max
Line (copy or scan
mode)
400 1 bit 3.00/
7.62
3.00/
7.62
2.00/
5.08
2.00/
5.08
Line (scan mode)
300 1 bit 4.00/
10.16
4.00/
10.16
2.67/
6.78
2.67/
6.78
Line (scan mode)
200 1 bit 6.00/
15.24
6.00/
15.24
4.00/
10.16
4.00/
10.16
Line (scan mode)
100 1 bit 6.00/
15.24
6.00/
15.24
4.00/
10.16
4.00/
10.16
Mixed (copy mode)
300 4 bit 1.0/
2.54
4.00/
10.16
0.89/
2.03
2.67/
6.78
Photo (copy mode)
200 8 bit 2.00/
5.08
6.00/
15.24
2.00/
5.08
4.00/
10.16
Note: speeds are given in inches per second (IPS) and cm per second
(cm/s). Speeds for Photo and Mixed modes are given for 36 in. (91.44)
wide original documents; speeds are faster for narrower documents.
Sophisticated software and hardware in the Scanner and the associated
Controller allow enlargement and reduction of the captured image and
corrections for several types of defects in original documents. All these
functions are controlled from the DDS User Interface on the Scanner.
The DDS User Interface, physically mounted on the Scanner, receives all
power and information from the Controller on the right side of the Printer.
Power On/ Off
Switch
Power Cord
and
Connector
Adjustable
Document
Catch Tray
Document Exit
Slot
Top Cover
DDS User
Interface and
Display
FORWARD/
REVERSE
Switch

Xerox 8830 Specifications

General

Brand	Xerox
Model	8830
Category	Printer
Language	English