8825/8830 DDS User Guide/43
Special features and making special copies
Saving and recalling job data
−
Store/ Recall key
(continued)
Saving Current Parameters as Default Settings (Save
Default Template)
The options set for the current job may be saved as default settings. Each
additional job will then have these settings established as the default
selections.
Press the Start/ Recall key.
Press the Next key until SAVE DEFAULT TEMPLATE is highlighted. Then,
press the Enter key to confirm the choice.
Ensure that all the options under Media Selection, Image Quality, and
Reduction & Enlargement are set as desired. Make any necessary
changes. Then, press the Enter key. The display confirms that the
parameters have been saved.
Press the Enter key to leave the screen.
JOB PARAMETERS SAVED
PRESS ENTER TO CONTINUE
STORE/ RECALL
LAST JOB
JOB TEMPLATES
SAVE DEFAULT TEMPLATE
To Next Page
Loading...
Need help?
General
