8825/8830 DDS User Guide/40
Special features and making special copies
Saving and recalling job data
−
Store/ Recall key
(continued)
Deleting the last job
If, for security reasons, the parameters and images of the last job should not
be left stored, use the DELETE LAST JOB feature.
Press the Store/ Recall key. Press the Enter key. The LAST JOB screen is
displayed.
Press the Next key to select DELETE LAST JOB.
The Operator is asked, ARE YOU SURE? The default selection is, NO.
Press the Next key to change the response to YES. Then, press the Enter
key, and the last job images and parameters are deleted.
Press the Enter key to return to the “READY...” screen.
Storing Job Templates
Groups of settings associated with a job may be stored in memory as
templates.
Up to 9 such templates may be stored and recalled by selecting
JOB TEMPLATES from the STORE/ RECALL menu.
Press the Store/ Recall key.
Press the Next key until JOB TEMPLATES is highlighted. Then, press the
Enter key to confirm the choice.
The JOB TEMPLATES screen is displayed.
Press the Next key to highlight SAVE, and press the Enter key.
JOB PARAMETERS AND IMAGES
FOR LAST JOB: DELETED
PRESS ENTER TO CONTINUE
LAST JOB
RECALL LAST JOB
DELETE LAST JOB
JOB TEMPLATES
RECALL TEMPLATE
SAVE TEMPLATE
DELETE TEMPLATE
STORE/ RECALL
LAST JOB
JOB TEMPLATES
SAVE DEFAULT TEMPLATE
To Next Page
Loading...
Need help?
General
