8825/8830 DDS User Guide/106
Job Accounting – Setup and Administration
Obtaining Reports
Obtaining reports - password required (continued)
Displaying the usage for the System Account
The usage values for the system account and its subaccounts may be
displayed in the same way as for user accounts. Enter account number 0
(zero) and the desired subaccount, and press the Enter key.
The types of usage data stored in the system subaccounts are shown in the
Account Definitions Table.
Account Definitions
Account Definitions
0.0 [Reserved]
0.1 Total system usage from all sources and all
accounts, whether or not Job Accounting is enabled
0.2 [reserved]
0.3 Tracks media used by jobs with no account number
when Job Accounting is set to Optional, and all
media usage when Job Accounting is set to
Disabled. Also tracks media used for printing
system-generated prints, such as test prints,
configuration sheets, and error pages, when
submitted by or caused by a job with an invalid
account number.
0.4 [Reserved]
0.5 Total media usage for jobs printed under an invalid
job account number. Such usage only occurs if an
account number is deleted after a job is submitted,
but before it prints. Normally, no usage should
accrue.
0.6 Tracks the media usage consumed by the
surrounding white space on the page when plot-
nested jobs are printed. The user’s account or
account 0.3, as appropriate, is charged for the
media area consumed by the actual plot-nested
images.
To Next Page
Loading...
Need help?
General
