8825/8830 DDS User Guide/56
Special features and making special copies
Printing a small sample of an Image
−
Sample Key
The Sample key allows the operator to print a small sample of a scanned
image and check it for quality or observe the results of features or copy
quality adjustments. The dimensions of the sample are the width of the
page by 210 mm. The sample is taken from a point equidistant from the
lead and trail edge of the image.
Press the Sample key. The associated indicator lamp illuminates, and the
8830 DSS is placed in PRINTER INTERRUPT mode. The printer
immediately prints a sample of the next image inserted into the scanner, and
the SAMPLE MODE screen is displayed.
Press START to print the complete image as a full-size copy. Press the
C/CA key to delete the scanned image.
To disable the Sample feature, press the Sample key again. The printer is
returned to the default priority setting, and the associated indicator lamp is
switched off.
SAMPLE MODE
PRESS START TO ACCEPT PAGE.
PRESS C/CA TO REJECT.
To Next Page
Loading...
Need help?
General
