8825/8830 DDS User Guide/44
Special features and making special copies
Saving and Recalling job data
−
Store/ Recall key
(continued)
Deleting Job Templates
Previously stored templates may be deleted, leaving the template location
blank and available to use again. Once a template has been deleted, it
cannot be recalled.
Press the Store/ Recall key. The JOB TEMPLATES screen is displayed.
Press the Next key until DELETE TEMPLATE is highlighted. Press the
Enter key to confirm the choice.
The DELETE screen is displayed.
Enter the template number to be deleted. Press the Enter key to confirm the
choice.
The deleted location is removed from the list in the DELETE screen, and the
contents of that location are deleted.
The operator may select other locations to be deleted in the same way.
If no more locations are to be deleted, press the Exit key to return to the
STORE/ RECALL screen.
DELETE TEMPLATE
TEMPLATES IN USE: 1
ENTER TEMPLATE NUMBER
JOB TEMPLATES
RECALL TEMPLATE
SAVE TEMPLATE
DELETE TEMPLATE
To Next Page
Loading...
Need help?
General
