8825/8830 DDS User Guide/19
Getting to know the 8825/8830 DDS
Power off
To switch off the Scanner, press the Power On/ Off Switch to the O position.
If the Scanner is switched off, communications to the Scanner will be lost.
To recover, the Printer and the Controller must also be switched off. Then,
switch on the Scanner, followed by the Controller and the Printer.
The Controller and the Printer
Please refer to the User Guide for the 8830 Printer for instructions for
installing media and other consumable supplies as well as detailed operating
instructions for the Printer. These instructions are applicable to the 8825
printer, also.
The 8825/8830 Controller Setup Guide contains details on configuring all the
settings for the Controller.
The 8825/8830 Network Administrator’s Guide contains valuable information
about network connectivity and help in determining network connectivity
settings.
To Next Page
Loading...
Need help?
General
