The units should not be placed in a built-in installation unless
proper ventilation is provided.
Never push objects of any kind into the slots of the units as
they may touch dangerous voltage points or short out parts that
could result in a risk of fire or electric shock.
Never spill liquid of any kind on the units.
Never remove any covers or guards that require a tool for
removal. There are no operator serviceable areas within these
covers.
Never attempt any maintenance function that is not specified in
this operator manual.
Never defeat interlock switches. Machines are designed to
prevent operator access to unsafe areas. Covers, guards, and
interlock switches are provided to ensure that the system will
not operate with the covers opened.
Unplug the reprographic system from the wall outlet and refer
servicing to qualified service personnel under the following
conditions:
• When the power cord is damaged or frayed.
• If liquid has been spilled into the product.
• If the units have been exposed to rain or water.
• If the units are producing unusual noises or odors.
• If the units or the cabinets have been damaged.
If you need additional safety information concerning the
8825/8830 DDS system or XES supplied materials, you may
call:
Within the United States:
1-800-828-6571 toll free.
In other countries:
Please call your local Xerox Engineering Ssystems service
office for help.
To Next Page
Loading...
Need help?
General
